Toshiba RemotEye II User Manual page 79

Trap Receiver Configuration Example
This example shows how to setup the trap receiver for the NMS application HP OpenView Workstation.
Open the file DEVICES in C:\OV\OVFILES (or the directory where HP Open View resides).
Add the following text to the last line:
Toshiba RemotEye II 1.3.6.1.4.1.186.1.19.2.1
Start HP OpenView Workgroup Node Manager.
Open the Customize Traps Alarms from the Monitor/Customize Trap... pull-down menu.
Click Add Devices Class... and select Toshiba RemotEye II.
Click the Add Trap... button.
Add specific traps 1 through 4, as desired.
The table below suggests messages to use for each specific trap:
Trap Conditions
Customized Traps
6 Specific: 1
6 Specific: 2
6 Specific: 3
6 Specific: 4
The above descriptions make use of the HP OpenView tool $# to retrieve the attributes of the traps.
78
0x1347 POWERSUPPLY 0
Description
on Battery time=$1 $2 $3
Test $3 $1
Add $1 $2
Remove $1 $2
RemotEye II User Manual – 50024-014