Installing Remoteye Ii/Internal - Toshiba RemotEye II User Manual

Installing RemotEye II/Internal

Follow these steps to install the RemotEye II/Internal card.
1. Turn the UPS off using the proper shutdown procedure as explained in the UPS manual.
2. Slide the RemotEye II/Internal printed circuit board into the extension option slot of the UPS.
3. Secure the printed circuit board using the UPS supplied screws.(See Figure 1: RemotEye
II/Internal)
RemotEye II User Manual – 50024-014
Figure 1: RemotEye II/Internal
17