Toshiba RemotEye II User Manual page 96

Shutdown Process in Windows 9x/ NT / 2000
When RemotEye II detects a power event, for example, AC power failure, the RemotEye II will send the
shutdown command to its connected clients. The clients will post a dialog box to notify the user that the
system will be shutdown.
Figure 22: Toshiba RemotEye II Client Software Shutdown Warning Message). The user can select
"Shutdown Now" to start the shutdown process or "Cancel" to cancel the shutdown process. Toshiba
RemotEye II Client Software will proceed with the shutdown process and the host or server will be
shutdown automatically if nothing is selected after the counter has counted down to zero.
Figure 22: Toshiba RemotEye II Client Software Shutdown Warning Message
There are five kinds of state for Toshiba RemotEye II Client Software.
UPS Connection OK. (Green Background)
Trying to locate UPS. (Blue Background)
Local machine is about to shut down. (Red Background)
The service is suspended. (Green Background)
Remote UPS is about to shut down or has shut down. (Grey Background)
Uninstalling Toshiba Remoteye II Client Software
To uninstall the Toshiba RemotEye II Client Software, the following procedure should be followed.
1. Right mouse click the "battery" icon in the taskbar and select "Exit" to stop the shutdown
service.
2. Select the "Add/Remove programs" icon from the Control Panel.
3. Select the "RemotEye II Service", and then click the "Add/ Remove" icon to remove the
software.
RemotEye II User Manual – 50024-014 95