Toshiba RemotEye II User Manual page 106

Configuration Groups
The Multi-Machine Configuration Utility window shown in Figure 8 contains two configuration groups: UPS
Configuration and Local Configuration. These configurations adjust the settings in the RemotEye II Client
software.
UPS Configuration
IP Address – allows the user to change the IP Address of the RemotEye II client
Local Configuration
Shutdown Delay – The amount of time after the AC power has been interrupted for proper shutdown of
the client side.
Force Shutdown Delay – Amount of time to properly shutdown the computer using the Script File after
proper shutdown of the Client.
Script File – File used for proper shutdown of the system.
Warn Speaker – produces a tone along with a warning message to indicate that an error has occurred.
The tone will only be produce if the box is checked; otherwise it will display only the warning message.
Ignore shutdown request – Request to shutdown the system. If the box is checked, then the systems will
NOT shutdown the system. Otherwise, it will execute shutdown.
Function Button Description
Create Template
Selecting the Create Template button will create a template file according to the configurations of UPS
Configuration and Local Configuration. This file should be named as template.ini.
Configuration
Select the Configuration button on the local machine side and the application will begin searching for the
location of the file upsconfig.ini. This file is created when the Multi-Machine Configuration is installed on
the computer. Once the file is located, it will modify the associated configurations according to
template.ini.
RemotEye II User Manual – 50024-014 105