Remoteye Ii Web Menu Navigation - Toshiba RemotEye II User Manual

RemotEye II Web Menu Navigation

The RemotEye II home page is comprised of Six primary menus:
•
UPS Monitoring,
•
UPS Management
•
Email Notification
•
EMD Configuration,
•
RemotEye II Management, and
•
UPS History.
The six primary menus provide access to UPS and RemotEye monitoring and control functions, and each
is discussed in detail in the following sections.
UPS Monitoring
This menu allows the user to view the collected data from the UPS measurements. The UPS measured
parameters are listed below and are allowed only to be read.
UPS Comprehensive View
This page lists the UPS parameters. This page will refresh automatically at a user-defined rate. To
change or view the refresh rate setting, select RemotEye II Management - HTTP Page Refresh Rates.
UPS Mode
This field shows the present UPS system mode. These readings include: Other, None, On-Line, Bypass,
Battery, Testing, and Output Shutdown.
Input Voltage
This field shows the present UPS input voltage in VAC.
Output Voltage
This field shows the present UPS output voltage in VAC.
Output Load
This field shows the present UPS load in % of kVA.
Battery Capacity Remaining (option)
This field shows the present remaining battery capacity expressed as a percentage of the battery's full
capacity.
Battery Temperature (option)
This field shows the present UPS battery temperature in
Input Frequency
This field shows the present UPS input frequency in Hz.
Output Frequency
This field shows the present UPS output frequency in Hz.
Date on RemotEye II
This field shows the RemotEye II date setting. This value is displayed in the mm/dd/yyyy format.
Time on RemotEye II
This field shows the RemotEye II time setting. This value is displayed in the hh:mm:ss 24-hour format (i.e.
8:30 p.m. is 20:30:00).
RemotEye II User Manual – 50024-014
o
C.
43