SNMP Trap Receivers
This page lists the parameters for SNMP trap receivers (for SNMP Network Management).
Index
This field shows the index numbers for the table entries.
NMS IP Address
This field allows the administrator to set the IP Address of the NMS station to which the traps should be
sent or to view the current setting.
Community String
This field allows the administrator to set the community string of the trap's PDU to be sent or to view the
current setting. The maximum length of the string is 19 characters.
Trap Type
This field allows the administrator to set the types of traps to be received or to view the current settings.
Setting options are:
None : Traps are not being received.
Toshiba Trap : Traps are received based on the Toshiba MIB.
JEMA Trap: Traps are received based on the JEMA MIB.
RFC 1628 Trap: Traps are received based on the RFC 1628 MIB.
Description
This field shows the customer description string.
66
RemotEye II User Manual – 50024-014