Toshiba RemotEye II User Manual page 51

UPS Management
This menu contains the control parameters of the UPS system that is connected to the RemotEye II.
UPS Configuration
This page shows the input and output electrical parameters and the thermal parameters of the UPS.
UPS Name
This field shows the specific name to identify a particular UPS.
UPS Attached Devices
This field allows the administrator to assign a description of load devices that attached to the UPS or to
view the current setting.
Input Voltage
This field allows the administrator to configure the input voltage or to view the current setting.
Note: The administrator must change this field to 208V if 208V is used for the input.
Input Frequency
This field allows the user to view the expected input frequency for the UPS.
Output Voltage
This field allows the user to view the expected output frequency for the UPS.
Output Frequency
This field allows the user to view the expected output frequency for the UPS.
Output VA Rating
This field allows the user to view the maximum output VA rating, defined as the maximum output voltage
multiplied by the maximum output current of the UPS.
Output Power Rating
This field allows the user to view the maximum output power rating expressed in Watts.
Battery Model
This field allows the administrator to configure the model of batteries in the UPS system.
Number of Batteries in Series
This field allows the administrator to configure the total number of batteries in series of the UPS system.
Number of Batteries in Parallel
This field allows the administrator to configure the total number of batteries in parallel of the UPS system.
Battery Rated Backup Time
This field allows the administrator to configure the estimated battery backup time (in minutes) during
power failure at 100% load.
50 RemotEye II User Manual – 50024-014