Setting Up; Requirements; Parallel Cable Requirements - Ricoh Aficio 650 Operating Instructions Manual

Requirements

Requirements
Before using this machine you must make sure that all the environmental and
electrical requirements have been met. Connect the machine to your host com-
puter using the parallel port, optional Network Interface Board 450-E (NIB 450-
E), or both.
Make sure that all the cables, connectors, and electrical outlets necessary to at-
tach the machine to your host computer or network are present.
Reference
For further information on using the parallel port. ⇒ P.5 "Connecting the Ma-
chine"
For information on using a network. ⇒ P.5 "Connecting the Machine"

Parallel Cable Requirements

Connect the machine to your host computer using a parallel port. This machine
does not provide the parallel cable to connect the machine to the host computer.
The machine's parallel connection is a standard bi-directional interface. It re-
quires a standard 36-pin parallel cable compliant with IEEE 1284 and a parallel
port available on the host computer.
Note
Do not use a parallel cable more than 3 meters (10 feet) long.

1. Setting up

3