COPYING
A
Open the bypass tray.
2
B
Adjust the guides to copy paper size.
Important
If the guides are not flush with the copy paper, a skew image or paper mis-
feeds might occur.
C
Lightly insert the copy paper face up until the beeper sounds.
The k indicator on the display is automatically selected.
Note
The face side of the paper set is copied on.
Do not stack paper over the limit mark; otherwise a skew image or paper
misfeeds might occur.
If the beeper is turned off, lightly insert the copy paper until it stops. See
"Operation Panel Beeper" of the "System Settings" manual.
When the document feeder is open, set the direction of the copy paper to
L.
Swing out the extender to support larger size copy paper larger than A4L,
" × 11"L.
1
8
/
2
Fan paper to get air between the sheets and avoid a multi-sheet feed.
Before setting, adjust the paper if curled or warped.
60
TSPH070E
TSPH060E