Operational Panel - Ricoh Aficio 650 Operating Instructions Manual

Operational Panel

1
8 7
{ { { { User Tools/Counter} } } } key
1.
User tools
Press to change the default settings
and conditions to meet your require-
ments.
Counter
Press to check or print the total num-
ber of prints and copies made.
2.
Panel Display
Shows operation status, error messages,
and function menus. ⇒ P.4 "Panel Dis-
play"
{ { { { Clear Modes/Energy Saver} } } } key
3.
Clear Modes
Press to clear the previously entered
job settings.
Energy Saver
Press this key for more than about 1
seconds to switch the machine to En-
ergy Saver mode.
{ { { { Sample Copy} } } } key
4.
Use this key to print a single sample set
before starting a long print run using Sort
function. ⇒ P.31 "Sample Printing"
5.
Main Power indicator
Lights up when the main power switch is
turned on, and goes off when the switch
is turned off.
2
6.
Press this switch to turn the power on
(the On indicator lights up).
To turn the power off, press this switch
again (the On indicator goes off).
7.
Press to change functions (Copy, Printer,
Document Server) shown on the panel
display. To use the Document Server
function, press the {Document Server} key.
8.
These indicators show the status of each
function.
9.
Use to enter a numeric value such as the
desired number of prints and zooming
ratio.
10.
Press to cancel the number which are be-
ing entered, or to stop scanning or print-
ing.
11.
Press to start scanning or printing a doc-
ument.
3
10 11
9
Operation Switch
Function keys
Function Status indicators
Green
Indicates the function is working.
Red
Indicates the function is interrupted
because of errors.
Press the Function key to switch the
panel display and check the error
message.
Number keys
{ { { { Clear/Stop} } } } key
{ { { { Start} } } } key
4 5
6
3