Ricoh Aficio 650 Operating Instructions Manual page 234

USER TOOLS (COPY FEATURES)
Menu
Photo
Pale
4
Generation
Original Image Density
Level
Auto Reset Timer
200
Description
For a photo original, adjust the finish quality level to match
the type of photo original.
Note
Default: Normal
[SP Mode Changed] is the value set during service setup.
Select [Screened Printed] for printed photo originals with
coarse dots, and [Continuous Tone] for printed photo orig-
inals with fine dots.
"Normal" is a well-balanced quality level for printed
photo, pale, photo, and text.
Adjust the quality level for the finish of a pale original with
normal density.
Note
Default: Normal
[SP Mode Changed] is the value set during service setup.
Adjust the quality level so as not to thicken the lines of the
finish image.
Note
Default: Normal
[SP Mode Changed] is the value set during service set up.
You can select one of seven original image density levels for
each of the original types (Text, Text·Photo, Photo, Pale,
Generation).
Note
Default: Normal
The machine returns to its initial condition automatically
after your job is finished. The time can be set from 10 to 999
seconds, or 0.
Note
Default: 60sec.
To turn the Auto Reset Timer off, input 0 seconds.
Note that when the Auto Reset Timer is turned off, the
machine will not return to the user code input display
automatically.