Ricoh Aficio 650 Operating Instructions Manual page 331

Messages
Add paper
Add ### paper in ***, or
press [Reset] to cancel
current job.
### ; Paper Size L K
*** ; Tray1 / Tray2 /
Tray3 / LCT
Add paper
Add ### paper to Bypass
Tray, or press [Reset] to
cancel current job.
### ; Paper Size L K
Paper misfeed has inter-
rupted Printing.
Paper is left in Staple
Tray.
Paper is left in Duplex
Tray.
Please open the bypass
tray.
Description
The paper size specified
from the host and that from
the panel display are differ-
ent from the input tray for
the current print job.
The print job is suspended.
No paper is detected in the
Bypass Tray.
A paper misfeed occurred,
and you removed all the
misfed paper.
The print job is interrupted.
Paper will remain in the sta-
ple tray, when the stapling
job is canceled or a new sta-
pling job is started.
Paper will remain in the du-
plex tray, when a new du-
plex print job is started.
The bypass tray is closed,
when the tray selection is set
to the bypass tray.
Error & Status Messages on the Operation Panel
Comments
Put the specified paper in the
specified tray and change
the paper settings of the User
Tools correctly, so the print
job will be automatically re-
sumed.
To continue the print job us-
ing the incorrect paper,
touch the [Continue] key.
To cancel the print job, touch
the [Reset] key.
After a few seconds without
any key touch, the print job
will be canceled automatical-
ly.
Set the specified paper in the
Bypass Tray, and the print
job will be resumed auto-
matically.
To cancel the print job, touch
the [Reset] key.
After a few seconds without
any key touch, the print job
will be canceled automatical-
ly.
To cancel the print job, touch
the [Reset] key.
To make the Jam recovery
operation, touch the [Contin-
ue] key.
Remove the paper from the
staple tray, and the print job
will resume automatically.
Remove the paper from the
duplex tray, and the print job
will resume automatically.
Open the bypass tray and set
the paper, then the print job
will resume automatically.
Touch the [Exit] key to cancel
the print job.
7
57