Operation Panel
1.
Screen Contrast knob
Adjusts the brightness of the panel display.
2.
Indicators
These indicators show errors or the status of
the machine.
See ⇒ P.159 "WHAT TO DO IF SOME-
THING GOES WRONG".
{ { { { User Tools/Counter} } } } key
3.
•User Tools
Press to change the default settings and
conditions to meet your requirements.
•Counter
Press to check or print the total number of
copies made.
See ⇒ P.193 "USER TOOLS (COPY FEA-
TURES)".
4.
Panel display
Shows operation status, error messages, and
function menus. See ⇒ P.10 "Panel Dis-
play".
8
2
3
Screen
User Tools/
1
Contrast
Counter
{ { { { Program} } } } key
5.
Press to select the program mode. See ⇒
P.64 "Program—Storing Your Copy Settings
In Memory".
{ { { { Clear Modes/Energy Saver} } } } key
6.
Press to clear the previously entered copy job
settings. Also use to switch to and from
Energy Saver mode. See ⇒ P.67 "Energy
Saver Mode—Saving Energy".
{ { { { Interrupt} } } } key
7.
Press to make interrupt copies during a copy
run. See ⇒ P.67 "Interrupt—Temporarily
Stopping One Job To Copy Something Else".
{ { { { Sample Copy} } } } key
8.
Use this key to make a single sample copy
before starting a long copy run. By checking
the finish and making any necessary changes
to the image quality settings before you make
multiple copies, you can save time and paper.
See ⇒ P.70 "Sample Copy—Checking Out-
put Quality Before Making A Long Copy
Run".
4
Program