Auto Tray Switching - Ricoh Aficio 650 Operating Instructions Manual

BASICS
Bypass Standard
size
*3
tray
1
*4 *6
Non-
standard
size
*1
The paper tray fence is fixed. If you wish to change the size of paper set in this tray,
please contact your service representative.
*2
If you wish to copy onto non-standard size paper, set the paper in the Bypass Tray
and specify the size. See ⇒ P.59 "Copying From The Bypass Tray".
*3
If you wish to copy onto OHP transparencies or thick paper, select OHP or Thick Pa-
per mode. See ⇒ P.62 "When copying onto OHP transparencies or thick paper" .
*4
Note that you cannot copy onto thick paper or OHP transparencies when "Face-Up/
Down selection in Bypass Mode" is set to "Face Up Exit." Use standard high-quality
paper with a weight of 52 – 128 g/m
tion in Bypass Mode" in ⇒ P.212 "Count Manager"
Always set one sheet at a time. See ⇒ P.59 "Copying From The Bypass Tray".
*5
*6
When setting copy paper, make sure the stack height does not exceed the limit mark.
The maximum number of sheets you can set at once depends on the paper thickness
and condition.
Important
If you use damp or curled paper, a misfeed might occur. In such a case, try
turning over the paper stack in the paper tray. If there is no improvement,
change to copy paper with less curl.
Note
When you use the bypass tray, be sure to set the copy paper direction to L.
Post cards should be fed from the bypass tray.
If you load paper of the same size and in the same direction in two or more
trays, the machine automatically shifts to another tray when the tray in use
runs out of paper. This function is called Auto Tray Switch. (If you put recy-
cled paper or special paper in paper trays using the Special Paper Indicate
menu, this function is not available to these trays unless their settings are
identical.) This saves interrupting a copy run to replenish paper even when
you make a large number of copies. You can cancel this setting. See "Auto Pa-
per Select", and "Auto Tray Switching" of the "System Settings" manual, and
"Bypass Tray: Special paper Indication" of the "System Settings" manual.
Reference
If you want to add paper, see ⇒ P.166 "B Loading Paper".
22
Metric version
A3L, A4L, A5L,
8" × 13"L
Vertical: 100 – 300
mm
*2
Horizontal: 148 –
432 mm
Postcards, adhesive labels, translucent
paper, OHP transparencies
Inch version
A3L, 11" × 17"L,
" × 14"L, 8
1 1
8 / /
2 2
× 11"L, 5 " ×
1
/
2
1
8 / "L
2
Vertical: 4.0" – 11.7"
Horizontal: 6.0" –
17.0"
*5
2
(14 – 34 lb) instead. See "Face-up/Down selec-
Paper Paper
weight capacity
52 – 163 50 sheets
2
" g/m , 14
– 90 lb
52 – 163 1 sheet
2
g/m , 14
– 90 lb