Display - Ricoh Aficio 650 Operating Instructions Manual

WHAT TO DO IF SOMETHING GOES WRONG
Machine's Condition
Staple mode has been reset. The paper size was
The number of sheets that
can be stapled has been ex-
ceeded.
The machine cannot staple
this size paper.
3
This paper is not available
in Duplex mode.
You cannot enter the de-
sired copy set number.

Display

Problem
The panel display is off.
Nothing happens when the
operation switch is turned
on.
160
Problem/Cause
changed during stapling.
--
--
A paper size not available
in Duplex mode has been
selected.
The number of copies ex-
ceeds the maximum copy
quantity.
Cause
The screen contrast knob is
turned to the dark position.
The machine is in Energy
Saver mode.
The operation switch is
turned off.
The main power switch is
turned off.
Action
You can only staple paper
of the same size. Select the
paper of the same size.
Check the stapler capacity.
See ⇒ P.51 "Staple".
Select the proper paper size
that can be used in Staple
mode. See ⇒ P.51 "Staple"
Select a paper size that can
be used in Duplex mode.
See ⇒ P.88 "Duplex—Mak-
ing Two-Sided Copies"
You can change the maxi-
mum copy quantity that
you can make at a time. See
" Maximum copy quanti-
ty" in ⇒ P.201 "General Fea-
tures 2/3"
Action
Set the screen contrast
knob to the light position
for proper viewing of the
panel display.
Press the {Clear Modes/Ener-
gy Saver} key to cancel En-
ergy Saver mode.
Turn on the operation
switch.
Turn on the main power
switch. See ⇒ P.4 "Guide To
Components"