Setting a stack of originals is completed when the bottom plate rises.
Important
After the bottom plate of the document feeder rises, do not add or force in
originals.
Note
To avoid a multi-sheet feed, shuffle the originals before setting them in the
document feeder.
You can set the timing for the bottom plate of the document feeder to rise.
See "ARDF Original Table Rise Time" in ⇒ P.210 "Input Output".
Setting Special Originals
When using Batch (SADF), Mixed Sizes or Thin mode
Batch (SADF) mode
Up to 100 standard originals can be set in the document feeder at a time. If there
are more than 100 originals, set Batch (SADF) mode so that originals can be fed
automatically without pressing the {Start} key each time they are set in the doc-
ument feeder.
Important
When setting special originals such as translucent paper, set them one by one.
Note
In Batch (SADF) mode, even when one original is set in the document feeder,
the original is automatically fed each time it is set.
TSPH040E
Setting Originals
2
31