Panasonic AJ-HPX2000 Operating Instructions Manual page 87

To read data on an SD memory card
1
Navigate the menu to the <SD CARD READ/WRITE>
screen.
To select a file number
2
Turn the JOG dial button to move the cursor to the
menu option [R. SELECT]. Then, press the dial
button.
< SD CARD READ/WRITE >
#
R.SELECT 1
READ
W.SELECT 1
WRITE
CARD CONFIG
TITLE READ
TITLE:
1: ******** 5: ********
2: ******** 6: ********
3: ******** 7: ********
4: ******** 8: ********
3
Turn the JOG dial button to select a desired number
(1 - 8). Then, press the dial button.
To read data on a selected file
4
Turn the JOG dial button to move the cursor to the
option [READ].
< SD CARD READ/WRITE >
R.SELECT :1
#
READ
W.SELECT :1
WRITE
CARD CONFIG
TITLE READ
TITLE:
1: ******** 5: ********
2: ******** 6: ********
3: ******** 7: ********
4: ******** 8: ********
5
Press the JOG dial button to display the following
message:
READ?
YES
#
NO
6
Turn the JOG dial button to move the cursor to YES.
Then, press the dial button.
When the data has been read, the following message
appears:
READ OK
The data will not be read if any of the following messages
appears when the JOG dial button is pressed:
Error message
READ NG
NO CARD
(No SD memory card inserted.)
READ NG
FORMAT ERROR
(SD memory card not properly
formatted.)
READ NG
NO FILE
(No file found.)
READ NG
ERROR
(SD memory card not
readable.)
READ NG
CANNOT ACCCESS
(SD memory card not
accessible.)
7
To exit the menu, press the MENU button.
The settings menu will be replaced by status
indications for the unit.
Adjustments and Settings for Recording : Handling data
Remedy
Insert an SD memory card.
The card has not been
formatted using the unit.
Replace the card.
Write file data.
Only data written with the unit
is readable.
Example: The SD memory card
is not accessible because it is
being played back.
After the operation in process,
read data.
87