Panasonic AJ-HPX2000 Operating Instructions Manual page 163

Items/ Adjustable
Data Saved Range
R(PHASE) –63 For performing the hue correction for
: red.
+00
:
+63
S C U F R
R-Mg(PHASE) –63 For performing the hue correction
between red and magenta.
:
+00
:
S C U F R +63
For performing the hue correction for
Mg(PHASE) –63
magenta.
:
+00
:
+63
S C U F R
Mg-B(PHASE) –63 For performing the hue correction
between magenta and blue.
:
+00
:
S C U F R +63
B(PHASE) For performing the hue correction for
–63
blue.
:
+00
:
S C U F R +63
B-Cy(PHASE) –63 For performing the hue correction
between blue and cyan.
:
+00
:
S C U F R +63
For performing the hue correction for
Cy(PHASE) –63
cyan.
:
+00
:
S C U F R +63
Cy-G(PHASE) –63 For performing the hue correction
: between cyan and green.
+00
:
+63
S C U F R
G(PHASE) –63 For performing the hue correction for
green.
:
+00
:
S C U F R +63
G-Yl(PHASE) –63 For performing the hue correction
between green and yellow.
:
+00
:
+63
S C U F R
Yl(PHASE) –63 For performing the hue correction for
: yellow.
+00
:
S C U F R +63
Yl-R(PHASE) –63 For performing the hue correction
between yellow and red.
:
+00
:
S C U F R +63
COLOR ON For switching ON/OFF of the 12-axis
CORRECT OFF independent color correction of the
position selected with the GAIN switch
(L, M, H).
S C U F R
The ____ in the Adjustable Range column indicates the
preset mode.
Remarks
Data Saved
GAIN
S C U F R
H.DTL LEVEL 00
S C U F R
V.DTL LEVEL 00
S C U F R
DTL CORING 00
S C U F R
H.DTL FREQ. 00
S C U F R
LEVEL
DEPEND.
S C U F R
MASTER
GAMMA
S C U F R
BLACK
GAMMA
S C U F R
TABLE
S C U F R
CORRECT
S C U F R
LOW SETTING
Items/ Adjustable
Range
Select the master gain from –3, 0, 3, 6,
MASTER –3dB
9, 12, 15, 18, 21, 24, 27, or 30dB.
:
0dB
:
30dB
For performing the horizontal detail
correction level setting.
:
10
:
63
For performing the vertical detail
correction level setting.
:
20
:
31
For performing the noise elimination
: level setting for detail.
01
:
15
For performing the horizontal detail
frequency selection.
:
18
:
31
0 For setting the LEVEL DEPEND.
1 When the Y-detail is emphasized, details
: of dark sections are compressed.
5
If the numerical value is larger, details of
bright sections are also compressed.
For setting the master gamma. (0.01
0.30
step)
:
0.45
:
0.75
–3 For setting the gamma curve for the dark
: portion.
OFF
–3 to –1:
:
The dark portion is compressed.
+3
OFF:
Standard state
+1 to +3:
The dark portion is extended.
For selecting the color correction table
MATRIX OFF
for the linear matrix.
A
B
COLOR ON For switching ON/OFF of the 12-axis
OFF independent color correction.
Notes
The items indicated by are the setting items for PAINT
MENU SW( ) R/W in the <SD CARD R/W SELECT>
screen. The items without
PAINT MENU LEVEL R/W.
Please refer to [ SD CARD R/W SELECT ] (page 184) for
more information.
If images are shot when the master gain is set to –3dB,
some coloring phenomena may occur on images in very
bright sections. In order to suppress the coloring
phenomena, switch the OUTPUT AUTO KNEE switch to
"CAM AUTO KNEE OFF", set the MANUAL item on the
KNEE/LEVEL screen to "ON", and then set a smaller
value for the KNEE SLOPE item on the KNEE/LEVEL
screen. After executing these settings, confirm that there
are no coloring phenomena and then start shooting.
Menu : Menu Description Tables
Remarks
are the setting items for
163