Panasonic AJ-HPX2000 Operating Instructions Manual page 71

Information Item
1. System mode
1080
720
480
576
2. Camera mode
60i
30P
24P
24PA
50i
25P
60P
50P
3. REC mode
DVCPRO HD
AVC-I 100 (optional)
AVC-I 50 (optional)
DVCPRO50
DVCPRO
DV
4. Shutter speed/mode 1 1/ ¢¢ . ¢
1/60 (1/100) - 1/2000, HALF
¢¢¢ min
5. P2 card remaining
free space
END
WP
LOOP
INFO P2
¢ / ¢
[1]
¢¢¢ min
6. P2 card remaining
free space
(when MODE CHECK
is being performed)
REC
7. Camera-recorder
REC indication
PRO14 - AC ADPT
8. Battery type
(when MODE CHECK
is being performed)
¢¢ . ¢ V
9. Battery remaining
¢¢¢ %
level/voltage
EMP
MAX
Indication
This indicates the mode that the unit operates in.
1080 interlace mode
720 progressive mode
480 interlace mode
576 interlace mode
This indicates the video system when signals output from CCD are
recorded on a P2 card or output as video signals.
1080-59.94i or 480-59.94i
1080-29.97P, 720-29.97P or 480-29.97P (2-2 Pull-down)
1080-23.98P, 720-23.98P or 480-23.98P (2-3 Pull-down)
1080-23.98P or 480-23.98P (2-3-3-2 Pull-down)
1080-50i or 576-50i
1080-25P, 720-25P or 576-25P (2-2 Pull-down)
720-59.94P
720-50P
This indicates the recording mode.
Note
DVCPRO HD is displayed in the Native recording.
This indicates that the shutter speed is set to SYNCHRO SCAN.
This indicates that a fixed shutter speed has been set.
The indication " ¢¢¢ min" stays illuminated under normal conditions or
blinks when the remaining level is near zero.
When the card space is used up, "END" blinks.
The P2 card is write-protected.
The camera-recorder is in LOOP REC mode. When loop recording cannot
be performed, for example because the P2 card has no free space, the
indication blinks.
P2 card being recognised.
Total free space/capacities of the P2 cards (when MODE CHECK is being
performed).
Note
When the menu option P2 CARD REMAIN is set to "ONE CARD", the
number of the P2 card slot that contains the target card is indicated,
together with the remaining space.
For more information, see [P2 Card Remaining Free Space/capacity
Indication] (page 76).
The number of the P2 card slot that contains the target card and the
remaining free space (when MODE CHECK is being performed) are
indicated. In LOOP REC mode, the minimum guaranteed recording time
( Refer to [ Loop Recording ] (page 36)) is indicated. This indication also
appears when the target P2 card has been switched with a user button.
When an external device is controlled through the 1394 connection (when
the 1394 option is set to BOTH),the recording status of the camera-recorder
is displayed using characters. The indication stays illuminated during
recording. This is displayed when the menu option REC TALLY of the
OPTION MODE is set to "CHAR".
This can also be displayed during the recording using the unit alone.
This is displayed when the menu option REC STATUS of the VF
INDICATOR2 is set to "ON".
Battery type, selected through a menu option. "AC ADPT" indicates when
an external DC power supply has been input.
Battery remaining level in tenths of a volt
The remaining battery level is indicated in percentage.
This indicates that the battery level is empty.
This indicates the battery is fully charged.
Adjustments and Settings for Recording : Viewfinder Screen Status Displays
Status
71