Panasonic AJ-HPX2000 Operating Instructions Manual page 75

Information Item
¢ . ¢ K
17. Color temperature
1 - 4
18. Filter position
–
DRS
19. Dynamic range
stretcher mode
A
20. WHITE BAL switch
B
position
P
T
6 : /10 : /12 : /15 : /20 :
21. Stored gain
indication
¢¢ dB
22. Gain value
M
23. LINE MIX GAIN
display
- - - - - - - - +
24. Audio input channel
F
and level meter
W
R
B
25. Super black ON
S
26. Super iris ON
+ +
27. Iris override
+
indication
(No indication)
–
– –
NC
28. Iris, F value
OPEN
F1.7 - F16
CLOSE
Z00 - Z99
29. Zoom indication
[i]
30. INTERVAL REC/PRE
RECORDING
indication/
P-REC (blink)
SD memory card
remaining free space
[SD]
¢¢ h ¢¢ m
END
COMP
31. Compression mode
Indication
Color temperature assigned to A, B, and PRST of the WHITE BAL switch
(this is a value stored at AWB performance or a value set through the menu
option). The indication is not provided in ATW mode.
Position of the CC/ND filter.
This indicates that the filter has not been set to a proper position.
This appears when the video level of a part with high brightness is
compressed, and the function stretching the dynamic range is selected.
WHITE BAL switch positioned at [A].
WHITE BAL switch positioned at [B].
WHITE BAL switch positioned at [PRST].
ATW mode active. When brightness and color are outside operating limits,
the indication blinks.
Storage gain (DS.GAIN) value (when active)
Current gain value.
This appears when LINE MIX GAIN (+6 dB) is active
Selected channel together with its audio level.
AUDIO IN switch is positioned at FRONT.
AUDIO IN switch is positioned at W.L.(WIRELESS)
AUDIO IN switch is positioned at REAR.
Super black ON.
Super iris ON.
Correction phase of the iris override (when active)
+ + : On the open side by 1
– – : On the closed side by 1
No indication : Standard status
Lens cable is not connected.
Lens iris is at maximum.
Lens iris value
Lens iris closed.
Note
These indications are provided when the lens is capable of indicating the iris
value. When the iris is being overridden, they blink.
Zoom degree is indicated. This indication is not provided for a lens that does
not return the zoom position, even if the indication is set to ON.
Displayed before and after operation during INTERVAL REC mode.
(blink) Displayed during INTERVAL REC operation.
(blink) ¢¢h¢¢m/¢¢s
Displays the pause time before the next recording during INTERVAL REC.
Indicated while pre-recorded video and audio are being recorded on the P2
card. If the USER switch is set to perform the PRE RECORDING function,
either "P-REC OFF" or the specified duration "1s - 8/15s" is displayed when
the PRE RECORDING mode is switched by pressing the USER switch.
If a video encoder card (AJ-YAX800G, optional accessory) is attached, the
remaining free space on the SD Memory card will be displayed when the
MODE CHECK button is pressed during proxy recording.
[END] is displayed when there is no remaining free space.
This appears when setting the mode for suppressing distortion of
compressed video images that may occur when dark parts are shot. ( Only
for the DVCPRO HD at 720P )
Adjustments and Settings for Recording : Viewfinder Screen Status Displays
Status
+: On the open side by 0.5
–: On the closed side by 0.5
75