Panasonic AJ-HPX2000 Operating Instructions Manual page 167

KNEE/LEVEL
Items/ Adjustable
Data Saved Range
Set the master pedestal.
MASTER PED –200
:
+015
:
+200
S C U F R
MANUAL ON Set the mode when the AUTO KNEE
KNEE OFF switch is OFF. The KNEE POINT/
SLOPE set value is enabled when this
setting is ON.
S C U F R
For setting the knee point position in
KNEE POINT 70.0%
increments of 1% steps.
:
93.0%
:
S C U F R 107.0%
KNEE SLOPE 00 For setting the inclination of the knee.
:
85
:
S C U F R 99
WHITE CLIP ON Set the WHITE CLIP feature to ON or
OFF OFF. The WHITE CLIP LVL set value is
enabled when this setting is ON.
S C U F R
WHITE CLIP 90% Set WHITE CLIP LEVEL.
LVL :
109%
S C U F R
A.KNEE 80% Set the AUTO KNEE POINT position in
1% steps. This setting is enabled when
POINT :
93%
the OUTPUT/AUTO KNEE selector
:
switch is set to CAM.AUTO KNEE ON.
107%
S C U F R
A.KNEE LVL 100 Set the AUTO KNEE LEVEL.
:
107
:
S C U F R 109
Set the AUTO KNEE response speed.
A.KNEE 1
The smaller the setting value, the faster
RESPONSE :
4
the response speed.
:
S C U F R 8
CHROMA OFF For setting the chroma level of the P
LEVEL –99% signals and the P
If this is set to OFF, the color elements of
:
+00%
video signals are eliminated.
:
+40%
S C U F R
DRS EFFECT 1 Set the compression level of the high-
DEPTH brightness component of DRS. If the
2
numerical value is larger, the
3
compression level of the high-brightness
component increases.
S C U F R
Note
The items indicated by are the setting items for PAINT
MENU SW( ) R/W in the <SD CARD R/W SELECT>
screen. The items without
PAINT MENU LEVEL R/W.
Please refer to [ SD CARD R/W SELECT ] (page 184) for
more information.
Remarks
R
signals.
B
are the setting items for
GAMMA
Items/ Adjustable
Data Saved Range
Set the master gamma in 0.01% steps.
MASTER 0.30
GAMMA :
0.45
:
0.75
S C U F R
R GAMMA –15 Set the Rch gamma.
:
+00
:
S C U F R +15
Set the Bch gamma.
B GAMMA –15
:
+00
:
S C U F R +15
GAMMA DFLT For selecting the gamma mode.
DFLT: This will operate as SD gamma in
MODE SEL HD
SD
FILMLIKE1
HD:
FILMLIKE2
Video gamma characteristics for HD
FILMLIKE3
(High Definition)
SD:
The gain in the dark section is higher
than the HD gamma.
FILMLIKE1:
The cinema gamma characteristics
for video applications are selected.
FILMLIKE2:
The cinema gamma characteristics
for video applications are selected.
In this setting gradations in highlit
areas can be expressed better than
when FILM LIKE1 is selected.
FILMLIKE3:
The cinema gamma characteristics
for video applications are selected.
In this setting gradations in highlit
areas can be expressed better than
when FILM LIKE2 is selected.
S C U F R
FILM LIKE1
FILM LIKE3
SD
FILM LIKE2
HD
Luminance
When the GAMMA MODE SEL item is used for FILM
LIKE3, the following settings are recommended.
MANUAL KNEE ： ON
KNEE POINT ： 85.0%
KNEE SLOPE ： 50
The ____ in the Adjustable Range column indicates the
preset mode.
Menu : Menu Description Tables
Remarks
SD mode, or HD gamma in HD
mode.
167