Download Print this page

GE JSP48GJ Use And Care Manual page 17

Hide thumbs Also See for JSP48GJ:

Advertisement

Grill
You can enjoy grilled foods year
'round, prepared in your own
kitchen on the grill that came
with your range.
Separate heating elements can be
set at different temperatures,
allowing you to use half the
cooking surface to grill meat and
the other half to prepare potatoes
or other vegetables, for a
complete meal.
How to Assemble the Grill
Step
1: Position the Grease
Collector and Pan in the cooktop
space provided.
Step
2:
Fit the Reflector Pan over
the Grease Collector.
Step 3: Plug the Grill Heating Unit
into the receptacle so Heatin~ Unit
rests on the edge of the Reflect&Pan.
How to Set Grill Controls
The control knobs must be pushed
in to start; this prevents surface
heating units from being turned on
accidentally. Push the knob in only
when it is in the OFF position. When
the knob is in any other position, it
can be turned without pushing it in.
Front and rear units of the grill
heating unit are controlled separately
by setting one or both surface unit-
control knobs. Heat only half the
grill surface for cooking small
portions; or set each half at a
different temperature for cooking
different types of foods.
Push in control knob or knobs,
depending on area needed for food.
Step 4: Place the 2-piece grate over
the heating element. Each half of
the grill is controlled by one of the
surface heating unit control knobs
on that side of the range.
NOTE: Be sure grill components
are cleaned before each use.
Turn knobs to the heat setting
you want.
I
(continued
next page)
>
17

Advertisement

loading

This manual is also suitable for:

Jsp49gj