Yamaha SXV70SJ Supplementary Service Manual page 401

1 Make sure a plastic band is
routed through the projection
located on the silencer, when
fastening it around the wire
harness and the starter cable.
(VX700/VX700DX/VT700)
2 Starter cable
3 Make sure the plastic bands are
routed through the projection
located on the silencer, when
fastening them around the wire
harness.
4 Connectors of the carburetor
switch
5 Water temperature sensor
coupler
6 Starter relay lead (VX700DX/
VT700)
7 Ignition coil coupler
8 Make sure a plastic band is
fastened around the wire harness
to prevent the coolant reservoir
hose from kinking.
9 AC magneto couplers
0 Starter relay coupler (VX700/
SX700/MM700)
A To the coolant reservoir tank
B Coolant reservoir hose
C Wire harness
D Gear position switch
E Route the parking brake cable
outside the gear position switch
leads.
a 0 ~ 5 mm (0 ~ 0.20 in)
CABLE ROUTING
9-40
SPEC