Yamaha SXV70SJ Supplementary Service Manual page 399

S When fastening the wire harness
with the attached clamp, bend the
clamp inward to fasten.
T Do not fasten.
U Fasten the wire harness at the
white tape mark, with a clamp.
V Oil hose
W Coolant reservoir hose
X To filler cap body
Y Passenger grip warmer relay
coupler (VX700/VX700DX/
SX700/MM700)
Z Passenger grip warmer relay
(VT700)
[ DC back buzzer (VX700DX/
VT700)
\ DC back buzzer coupler
(VX700DX/VT700)
] DC back buzzer coupler (VX700/
SX700/MM700)
_ Connectors of the gear position
switch (VX700/SX700/MM700)
a Pass the brake hose through the
hose guide.
b Connectors of the gear position
switch (VX700DX/VT700)
c To the gear position switch
d Ensure this is not kink.
e Fasten the wire harness, fuel
tank breather hose and oil tank
breather hose with a plastic band.
f Install the starter lever to the
position as illustrated.
CABLE ROUTING
9-38
SPEC