Yamaha SXV70SJ Supplementary Service Manual page 102

Handlebar holder
1
Thumb warmer coupler
2
Engine stop switch coupler
3
Thumb warmer switch coupler
4
Clamp the connectors.
5
Grip warmer connector
6
Grip warmer switch coupler
7
High beam switch coupler
8
Tail / brake light switch coupler
9
Parking brake cable
10
Clamp the tail / brake light switch
11
lead, high beam switch lead, grip
warmer lead and grip warmer
switch lead. Do not clamp the
parking cable and starter cable.
Oil tank breather hose
12
Left handlebar switch
13
Starter cable
14
Route the throttle cable and
15
starter cable through the holder.
Clamp the oil tank breather
16
hose.
Route the compression spring
17
through the holder.
Steering column
18
Clamp the fuel tank breather
19
hose.
Clamp the main harness and
20
steering gate.
Fuel tank breather hose
21
Fuel sender coupler
22
Oil level switch coupler
23
Y.P.V.S. lead connector
24
Attach the hexagon bolt to the
25
Y.P.V.S. bracket.
Clamp the main harness and fuel
26
sender lead.
Clamp them at the position of 30
X 40 mm (1.18 X 1.57 in) from
the end of the lead wire cover.
Lead wire cover
27
Body ground
28
CABLE ROUTING
–96–
SPEC