Yamaha SXV70SJ Supplementary Service Manual page 11

COOLING SYSTEM
WARNING
Coolant is poisonous. It is harmful or fatal if
swallowed.
S If coolant is swallowed, induce vomiting
immediately and get immediate medical
attention.
S If coolant splashes in your eyes, thorough-
ly wash them with water and consult a doc-
tor.
S If coolant splashes on your skin or clothes,
quickly wash it away with soap and water.
13. Connect:
S Coolant hoses (left and right)
14. Install:
S Rear bumper cover 1
Bolt (rear bumper cover):
3 Nm (0.3 mSkg, 2.2 ftSlb)
15. Inspect:
S Gasket (coolant drain bolt)
Damage ! Replace.
16. Install:
S Gasket
S Coolant drain bolt 1
Coolant drain bolt:
13 Nm (1.3 mSkg, 9.4 ftSlb)
17. Install:
S Exhaust joint
S Exhaust pipe
S Exhaust joint nut 1
Refer to "EXHAUST ASSEMBLY" in CHAP-
TER 5.
Nut (exhaust joint):
14.5 Nm (1.5 mSkg, 10 ftSlb)
18. Fill:
S Cooling system
Recommended coolant:
High quality silicate – free
ethylene glycol antifreeze
containing corrosion inhibitors
Coolant mixing ratio
(coolant : water)
3 : 2 (60% : 40%)
Total amount:
SXV70SJ
4.7 L (4.14 Imp qt, 4.97 US qt)
VT70J
5.0 L (4.40 Imp qt, 5.29 US qt)
–5–
INSP
ADJ