Yamaha SXV70SJ Supplementary Service Manual page 380

Parts to be tightened
Wheel bracket shaft and sliding frame
Set bolt (front axle)
Speedometer gear assembly
NOTE:
Tightening steps:
1. Tighten the bolt to a torque of 120 Nm (12 m · kg, 85 ft · lb).
2. Loosen the bolt completely.
3. Retighten the bolt to a torque of 60 Nm (6.0 m · kg, 43 ft · lb).
MAINTENANCE SPECIFICATIONS
Tightening torque
Nm
72
8
20
9-19
SPEC
m · kg ft · lb
7.2 52 Apply LOCTITE
0.8 5.8
2.0 14
Remarks
®