Ip Ospf Interface Cost - 3Com SuperStack II 9300 Command Reference Manual

ip ospf interface cost

3500
9000
9400
3900
9300
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Assigns a cost to an OSPF interface.
Valid Minimum Abbreviation
ip o i c
Important Consideration
The interface cost reflects the line speed of the port. Although the
system calculates a default cost value based on the module media
type, you can use this command to manually change the cost to a
different value.
Options
Prompt Description
IP interface Index number of one or more
interfaces to which you want
to assign a cost
Cost Cost that you want to assign to
the specified interface (Higher
values are slower ports.)
ip ospf interface cost
Possible Values [Default]
One or more all (factory
valid IP interface default), or
index numbers current value
all
? (for a list of
selectable
indexes)
1 – 65535 Cost of slowest
port (usually 1)
551