System Nvdata Restore - 3Com SuperStack II 9300 Command Reference Manual

C 3: S
110
HAPTER YSTEM
system nvData
restore
3500
9000
9400
3900
9300
E
NVIRONMENT
Restores the NV data that was previously saved to a file.
Valid Minimum Abbreviation
sy nv r
Important Considerations
Before you attempt to restore the data to a system that has a different
system ID, be aware that the following types of NV data may cause
problems when they are restored:
Management IP addresses (defined in IP interface configurations)
are saved as NV data and restored. To avoid duplicate IP address
problems, you may need to change the IP address of defined
interfaces before you connect the restored system to the network.
Statically configured Ethernet addresses are saved as NV data.
Verify that you have no duplicate addresses when you restore the
NV data.
Options
Prompt Description
Host IP IP address of the host on which
address the NV data file resides
NV control Location of the NV data file
file
Do you wish Confirmation of the operation.
to (You may not want to reboot
continue? because resetting nonvolatile
data may leave the system in
an inconsistent state, so the
system reboots after each
reset.)
Procedure
1 To restore the NV data, from the top level of the Administration Console,
enter:

system nvData restore

The system prompts you to enter information for restoring the NV data
that was saved to a file.
Possible Values [Default]
Any valid IP address Previous IP
address that
was used
file name Previous nv
control file that
full path
was used
n (no) y
y (yes)