Ip Ospf Linkstatedata Summary - 3Com SuperStack II 9300 Command Reference Manual

ip ospf linkStateData
summary
3500
9000
9400
3900
9300
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Displays summary link state advertisements (LSAs) in the link state
database.
Valid Minimum Abbreviation
ip o l s
Important Consideration
To view link state database information, OSPF must be
active (enabled).
Options
Prompt Description
Area ID Area ID (in the form
n.n.n.n where 0 <= n <= 255)
that corresponds to the OSPF
area for which you want to
view summary LSA information
Area mask Subnet mask of the OSPF area
for which you want to view
summary LSA information
LSID Link State ID:
For type 3 summary LSAs,
this is the IP address of the
destination network
For type 4 summary LSAs,
this is the autonomous
system boundary router's
Router ID (in the form of an
IP address)
LSID mask Link State ID bit mask
(Example: 255.0.0.0)

ip ospf linkStateData summary

Possible Values [Default]
Valid area ID 0.0.0.0 (factory
default), or
current value
Valid area mask 0.0.0.0 (factory
default), or
current value
For type 3 0.0.0.0 (factory
summary LSAs, default), or
a valid IP current value
address
For type 4
summary LSAs,
a valid router ID
Link State ID bit 0.0.0.0 (factory
mask default), or
current value
561