Ipx Rip Policy Define - 3Com SuperStack II 9300 Command Reference Manual

ipx rip policy define

3500
9000
9400
3900
9300
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Define a RIP (Routing Information Protocol) policy.
Valid Minimum Abbreviation
ipx ri p d
Important Considerations
Every router maintains a table of current routing information in a
routing table.
Routing protocols receive or advertise routes from the network.
Routing Policies control the flow of routing information between the
network, the protocols, and the routing table manager.
Prompt Description
Type Type of the policy: Import
(apply the policy to received
routes) or Export (apply the
policy to advertised routes).
Route Origin of the route to which
Origin this policy applies. This
parameter is valid only if the
policy Type is set to Export.
Route Route to which this policy
address applies.
IP interfaces One or more IP interfaces on
this router associated with the
RIP policy.
Source node 6-byte MAC address of the
address router that can forward
packets to the network. A
node address of all zeroes
(00-00-00-00-00-00)
means that the route is
connected directly to the
router.
Policy action Whether this router accepts or
rejects a route that matches
the policy.
ipx rip policy define
Possible Values [Default]
Import Import
Export
Dir All
Static
RIP
All
0x1-0fffffffe All
All
One or more IP All
interface numbers
A node address in All
the format
xx-xx-xx-xx-xx-xx
All
Accept Accept
Reject
633