3Com SuperStack II 9300 Command Reference Manual page 559

3com switch command reference guide
Hide thumbs Also See for SuperStack II 9300:
Table of Contents

Advertisement

Field
Link Data
Link ID
Link Type
LS Age
LS Seq
LSID
Metric
Router ID
ip ospf linkStateData router
Description
PTP — MIB II index value for an unnumbered
point-to-point interface.
Transit Net — IP address of the router's interface
Stub Net — Network IP address mask
Virtual link — IP interface address of neighboring
router
PTP — Neighboring router's router ID
Transit Net — Address of designated router
Stub Net — IP network/subnetwork number
Virtual link — Neighboring router's router ID
PTP — Connection is point-to-point to another router.
Transit Net — Connection is to a transit network
(one that has more than one OSPF router on it).
Stub Net — Connection is to a stub network.
Virtual link — Connection is to a far-end router
that is the endpoint of a virtual link.
Time (in seconds) since LSA was originated
Sequence number of the LSA (used to detect older
duplicate LSAs)
ID number of the router that originated the LSA
Cost of the link
Originating router ID
559

Advertisement

Table of Contents
loading

This manual is also suitable for:

Corebuilder 9000Corebuilder 9400Superstack ii 3900

Table of Contents