3Com SuperStack II 9300 Command Reference Manual page 723

QoS Control Modify Example (3500)
This example shows modifications to a predefined control (4) for a
predefined classifier (405).
Select menu option: qos control modify
Enter control number {1-5}: 4
Enter control name {?} [Controlled Load]:
Interactive_Multimedia
Enter rate limit type (none,receivePort,aggregate) [none]:
receivePort
Enter service for conforming packets (high,best,low) [high]:
Are conforming packets loss eligible (yes,no) [no]:
Enter service for excess packets (high,best,low,drop) [low]:
drop
How should rate limit be expressed (percentage,KBytes/sec)
[KBytes/sec]:
Enter rate limit in KBytes/sec (0-65434): 2048
Enter burst size in KBytes (16-8192) [181]:
Select bridge ports (1-13|all|?) [1-13]:
Select IEEE 802.1p tag to apply to forwarded frames.
Enter IEEE 802.1p tag {0-7|none|?} [none]:
Drop packets used to establish a TCP connection (yes,no) [no]:
Do you want to modify/add the start and end time for the control (yes,no) [no]
y
Do you want to have any time control (yes,no) [no]: y
Enter input time type (specific,daily,dayoftheweek,everydayoftheweek,weekdays,
weekends,everyweekdays,everyweekends) [specific]:
Enter the Qos Control starting day (mm-dd): 06-02
Enter the Qos control starting time (hh:mm): 09:00
Enter the Qos Control ending day (mm-dd): 06-02
Enter the Qos control ending time (hh:mm): 17:00
Select classifiers which are subject to this control.
Enter classifiers (20,23,404-407,420,430,4...[404-407]: 405
qos control modify 723