3Com SuperStack II 9300 Command Reference Manual page 314

C 11: T
314
HAPTER RUNKS
Prompt Description
Ports Total number of the bridge
ports that you want to be
part of the trunk
Possible Values
9000:
Layer 2 modules support
up to 4 trunk groups
with up to 6 ports per
trunk
Layer 3 modules support
up to 3 trunk groups
with up to 6 ports per
trunk
The 6-port SAS (3-port
DAS) FDDI Layer 3
supports 3 trunk groups.
In SAS mode the trunks
can contain up to 6
ports. In DAS mode, the
trunks can contain up to
3 ports.
The FGA24 switch fabric
module supports up to
4 trunk groups with up
to 6 ports per trunk and
the FGA24T switch
fabric module supports
up to 12 trunk groups
with up to 6 ports per
trunk
(The GA9 cannot
support 12 trunk groups
because there are not
enough ports on this
module.)
3500:
Supports up to 4 trunk
groups with up to 8
ports per trunk
3900:
Supports up to 4 trunk
groups with up to 6
ports per trunk
9300 and 9400:
Supports up to 12 trunk
groups with up to 6
ports per trunk
all
[Default]
Currently
configured
ports