3Com SuperStack II 9300 Command Reference Manual page 705

Nonflow Classifier Procedure
1 To modify the cast type, enter a new cast type.
For a nonflow classifier, the options are unicast, multicast,
broadcast, and all
2 To modify the associated protocols, enter another protocol.
The options are TCP/IP, IP, IPX, Appletalk, any, or custom.
3 If you choose custom, select the protocol type (ethernet or
DSAP/SSAP).
For the ethernet type, enter the hexidecimal value
For the DSAP/SSAP type, enter the DSAP and SSAP hexidecimal
values
4 To modify the handling of IEEE 802.1p tags, enter the appropriate tags
using a value in the range of 0 through 7, or enter all
QoS Classifier Modify Example (Flow Classifier)
Select menu option (qos/classifier): modify
Enter classifier number
{20,23,26,401-407,420,430,440, 450, 460, 470,480,490|?}:26
Enter classifier name {?} [IPFilter1]:
Select cast type (unicast,multicast|all|?)
[unicast,multicast]:
Select IP protocol type (TCP,UDP|all|?) [TCP,UDP]:
Enter source IP address [168.20.30.0]:
Enter source IP address mask [255.255.0.0]:
Enter destination IP address [192.1.1.0]:
Enter destination IP address mask [255.255.255.0]:
Enter start of TCP source port range (0-65535) [0]:
Enter end of TCP source port range (0-65535) [65535]:
Enter start of TCP destination port range (0-65535) [0]:
Enter end of TCP destination port range (0-65535) [65535]:
Enter another filter (yes,no) [no]: n
qos classifier modify 705