Cancelling 2 On 1 Copy Settings - Olivetti COPIA 9916 Instructions Manual

Hide thumbs Also See for COPIA 9916:
Table of Contents

Advertisement

❏ You can only set vertical A5 and A4-size
originals (A5 , A4 ) for 2 on 1 combination
copying.
3. Press Copy Special Features.
4. Press F4 (2 ON 1 COMB).
5. Press F3 (ORIGNAL SIZE) to select the size of the
original.
❏ The selection changes every time you press
F3.
SPECIFY THE ORIGINAL SIZE
6. Press Set.
7. Press F4 (PAPER SIZE) to select the copy paper
size.
❏ The selection changes every time you press
F4.
❏ If necessary, change or readjust the paper in
the paper cassette.
SPECIFY THE ORIGINAL SIZE AND PAPER SIZE
8. Press Set.
SPECIFY THE ORIGINAL SIZE AND PAPER SIZE
9. Press Set again.
READY TO COPY
[2 ON 1 SETTING]
AUTO ZOOM
70%
A4
COPY RATIO
PAPER SELECT
10. Use the numeric keypad to enter the number of
copies required.
❏ You can select from 1 to 99 copies.
❏ For one copy only, you do not need to enter the
number of copies.
❏ If you make a mistake, press Clear and start
again.
11. Press Start to begin copying.
5 - 6
SPECIAL COPYING FEATURES
A5
A4
1
ORIGNAL SIZE
PAPER SIZE
A4
1
ORIGNAL SIZE
PAPER SIZE
A4
1
ORIGNAL SIZE
PAPER SIZE
21/08 '99
SAT 15:30
TEXT
1
SCAN MODE

CANCELLING 2 ON 1 COPY SETTINGS

Pressing the Stop button cancels the 2 on 1 copy
settings.
I
Pressing the Stop button returns all settings,
including the number of copies and the scanning
mode, to their default settings.
I
Pressing the Stop button after copying has started
may cause a blank sheet to be output.
NOTE:
The 2 on 1 combination copy feature automatically
selects the magnification. However, this can be set
to standard magnification mode, which enlarges or
reduces to standard sizes, or zoom size copying
mode, in which any magnification ratio can be set.
The 2 on 1 combination copy feature cannot be
selected at the same time as the frame erase
feature, the binding margin feature, or the 2-page
separation feature.

Advertisement

Table of Contents
loading

Table of Contents