Table of Contents
Advertisement
If you selected 12 STANDARD COPY QTY in step 2:
3. Press Set.
STANDARD COPY QTY
0 1
–
4. Use the numeric keypad to enter the quantity you
want to set as the default.
❏ You can also use F2 (–) or F3 (+) to select the
quantity.
❏ You can select from 01 to 99.
5. Press Set to register your setting.
6. To continue registering the next setting (13 FRAME
ERASE WIDTH), go to step 3 in the next procedure.
-or-
Press Stop to return to standby mode.
If you selected 13 FRAME ERASE WIDTH in step 2:
3. Press Set.
FRAME ERASE WIDTH
0 2 m m
–
4. Use the numeric keypad to enter the width you want
to set as the default.
❏ You can also use F2 (–) or F3 (+) to select the
width.
❏ You can select a width from 01 mm to 20 mm.
5. Press Set to register your setting.
6. To continue registering the next setting (14 AUTO
SORT), go to step 3 in the next procedure.
-or-
Press Stop to return to standby mode.
If you selected 14 AUTO SORT in step 2 (on p. 8-8):
3. Press Set.
SELECT AN ITEM
AUTO SORT
4. Use the search buttons (L,M) to select the auto
sort setting you want to set as the default.
5. Press Set to register your setting.
6. Press Stop to return to standby mode.
NOTE: You can only use AUTO SORT when you load
a document in the Automatic Document Feeder (ADF).
+
+
01 ON
02 OFF
SUMMARY OF COPYING SETTINGS
8 - 3
Advertisement
Table of Contents
