Optional) Configuring Retransmission Of Accounting-Stop Packet; Checking The Configuration - Huawei Quidway S9300 Configuration Manual

1 AAA and User Management Configuration
The time taken to restore an HWTACACS server to the active state is set.
By default, the time taken by the primary HWTACACS server to restore to the active state is
five minutes.
----End
1.5.11 (Optional) Configuring Retransmission of Accounting-Stop
Packet
Context
If the HWTACACS accounting mode is used, the S9300 sends an Accounting-Stop packet to
the HWTACACS server after a user goes offline. If the connectivity of the network is not
desirable, you can enable the function of retransmitting the Accounting-Stop packet to prevent
the loss of accounting information.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
hwtacacs-server accounting-stop-packet resend { disable | enable number }
The function of retransmitting the Accounting-Stop packet is configured.
You can enable the function of retransmitting the Accounting-Stop packet and set the
retransmission count, or disable the function. By default, the retransmission function is enabled
and the retransmission count is 10.
----End

1.5.12 Checking the Configuration

Prerequisite
The configurations of the HWTACACS server template are complete.
Procedure
l
----End
Example
After completing the configurations of the HWTACACS server template, you can run the
display hwtacacs-server template [ template-name ] command to view the configuration of
the template.
1-24
Run the display hwtacacs-server template [ template-name ] command to check the
configuration of the HWTACACS server template.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
Issue 06 (2010–01–08)