Optional) Setting The Access Type Of The Local User; Optional) Configuring The Ftp Directory That A Local User Can Access - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Security

1.8.3 (Optional) Setting the Access Type of the Local User

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
local-user user-name service-type { 8021x | bind | ftp | ssh | telnet | web }
The access type of the local user is set.
By default, a local user can use all access types.
A user can successfully log in only when its access type matches the specified access type.
----End
1.8.4 (Optional) Configuring the FTP Directory That a Local User
Can Access
Context
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
local-user user-name ftp-directory directory
The FTP directory that a local user can access is configured.
By default, the FTP directory that a local user can access is null.
----End
Issue 06 (2010–01–08)
NOTE
If the access type of a local user is set to FTP, you must configure the FTP directory that the local user can
access; otherwise, the FTP user cannot log in.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA and User Management Configuration
*
1-37