Figure 7-1 Networking Diagram For Configuring Pppoe - Huawei Quidway S9300 Configuration Manual

7 PPPoE+ Configuration

Figure 7-1 Networking diagram for configuring PPPoE+

PPPoE client
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
None.
Procedure
Step 1 Enable PPPoE+.
<Quidway> system-view
[Quidway] pppoe intermediate-agent information enable
Step 2 Configure the format of information fields.
Configure the S9300 to add the circuit ID in extend format to PPPoE packets, that is, the format
in hexadecimal notation is used.
[Quidway] pppoe intermediate-agent information format circuit-id extend
7-6
IP network
GE1/0/0
PPPoE+
S9300
GE2/0/1
Enable PPPoE+ globally.
NOTE
After PPPoE+ is enabled globally, PPPoE+ is enabled on all the interfaces.
Configure the contents and format of fields to be added to PPPoE packets on the S9300.
Configure the action for the S9300 to process PPPoE packets.
Configure the interface connecting the S9300 and the PPPoE server as the trusted interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
BRAS
PPPoE server
GE2/0/2
PPPoE client
Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
Issue 06 (2010–01–08)