Enabling Pppoe+ Globally; Configuring The Format And Contents Of Fields To Be Added To Pppoe Packets - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
Data Preparation
To configure PPPoE+, you need the following data.
No.
1
2

7.3.2 Enabling PPPoE+ Globally

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
pppoe intermediate-agent information enable
PPPoE+ is enabled globally.
After the pppoe intermediate-agent information enable command is run in the system view,
PPPoE+ is enabled on all the interfaces.
By default, PPPoE+ is disabled globally.
----End
7.3.3 Configuring the Format and Contents of Fields to Be Added
To PPPoE Packets
Context
After PPPoE+ is enabled globally, the user-side interface on the S9300 adds information in
common format to the received PPPoE packets. You can modify the format of the field to be
appended through this task.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
pppoe intermediate-agent information format { circuit-id | remote-id } { common |
extend | user-defined text }
The format and contents of fields to be added to PPPoE packets are set.
Issue 06 (2010–01–08)
Data
Interface number related to PPPoE authentication
Format and contents of the fields to be added to PPPoE packets
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 PPPoE+ Configuration
7-3