Creating A Radius Server Template; Configuring A Radius Authentication Server; Configuring The Radius Accounting Server - Huawei Quidway S9300 Configuration Manual

1 AAA and User Management Configuration

1.4.2 Creating a RADIUS Server Template

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
radius-server template template-name
A RADIUS server template is created and the RADIUS server template view is displayed.
----End

1.4.3 Configuring a RADIUS Authentication Server

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
radius-server template template-name
The RADIUS server template view is displayed.
Step 3 Run:
radius-server authentication ip-address port [ source loopback interface-number ]
The primary RADIUS authentication server is configured.
By default, the IP address of the primary RADIUS authentication server is 0.0.0.0 and the port
number is 0.
Step 4 (Optional) Run:
radius-server authentication ip-address port [ source loopback interface-number ]
secondary
The secondary RADIUS authentication server is configured.
By default, the IP address of the secondary RADIUS authentication server is 0.0.0.0 and the port
number is 0.
----End

1.4.4 Configuring the RADIUS Accounting Server

Procedure
Step 1 Run:
system-view
1-12 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
Issue 06 (2010–01–08)