Optional) Setting The Retransmission Count Of The Authentication Request; Checking The Configuration - Huawei Quidway S9300 Configuration Manual

2 NAC Configuration
If the client does not support the handshake function, the S9300 will not receive handshake
response packets within the handshake interval. In this case, you need to disable the user
handshake function to prevent the S9300 from disconnecting users by mistake.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
dot1x handshake
The handshake with 802.1x users is enabled.
By default, the S9300 is enabled to send handshake packets to online users.
You can run the dot1x timer command to set the handshake interval. For details, see .
----End
2.4.15 (Optional) Setting the Retransmission Count of the
Authentication Request
Context
If the S9300 does not receive a response after sending an authentication request to a user, the
The S9300 retransmits the authentication request to the user. When no response is received when
the authentication request has been sent for the maximum number of times, the S9300 does not
retransmit the authentication request to the user.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
dot1x retry max-retry-value
The retransmission count of the authentication request is set.
By default, the S9300 retransmits an authentication request to an access user twice.
----End

2.4.16 Checking the Configuration

Prerequisite
The configurations of 802.1x authentication are complete.
2-20 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
Issue 06 (2010–01–08)