Checking The Configuration; Configuring A Radius Server Template - Huawei Quidway S9300 Configuration Manual

1 AAA and User Management Configuration
Step 6 Run:
cmd recording-scheme recording-scheme-name
The commands that are used on the S9300 are recorded.
By default, the commands that are used on the S9300 are not recorded.
Step 7 Run:
outbound recording-scheme recording-scheme-name
The information about connections is recorded.
By default, information about connections is not recorded.
Step 8 Run:
system recording-scheme recording-scheme-name
System events are recorded.
By default, system events are not recorded.
----End

1.3.6 Checking the Configuration

Prerequisite
The configurations of AAA schemes are complete.
Procedure
l
l
l
l
l
----End

1.4 Configuring a RADIUS Server Template

This section describes how to configure a RADIUS server template on the S9300.
1.4.1 Establishing the Configuration Task
1.4.2 Creating a RADIUS Server Template
1.4.3 Configuring a RADIUS Authentication Server
1.4.4 Configuring the RADIUS Accounting Server
1.4.5 Configuring a RADIUS Authorization Server
1-10
Run the display aaa configuration command to check the summary of AAA.
Run the display authentication-scheme [ authentication-scheme-name ] command to
check the configuration of the authentication scheme.
Run the display authorization-scheme [ authorization-scheme-name ] command to check
the configuration of the authorization scheme.
Run the display recording-scheme [ recording-scheme-name ] command to check the
configuration of the recording scheme.
Run the display access-user command to check the summary of all online users.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
Issue 06 (2010–01–08)