Creating A Local User - Huawei Quidway S9300 Configuration Manual

1 AAA and User Management Configuration
Applicable Environment
You can create a local user on the S9300, configure attributes of the local user, and perform
authentication and authorization for users logging in to the S9300 according to information about
the local user.
Pre-configuration Tasks
None
Data Preparation
To configure local user management, you need the following data.
No.
1
2
3
4
5
6

1.8.2 Creating a Local User

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
local-user user-name password { simple | cipher } password
A local user is created.
If the user name contains the domain name delimiter, such as @, |, and %, the character string
before @ refers to the user name and the character string after @ refers to the domain name. If
the user name does not contain domain name delimiter, the entire character string represents the
user name and the domain name is default.
----End
1-36 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
Data
User name and password
Access type of the local user
Name of the FTP directory that the local user
can access
Status of the local user
Level of the local user
Maximum number of local access users
Issue 06 (2010–01–08)