Maintaining Aaa And User Management; Clearing The Statistics; Monitoring The Running Status Of Aaa - Huawei Quidway S9300 Configuration Manual

1 AAA and User Management Configuration
----------------------------------------------------------------------------
Total 1 user(s)
Run the display local-user [ username user-name ] command, and you can view detailed
information about a specified user.
<Quidway> display local-user username lsj
The contents of local user :
Password
State
Auth-Type-Mask
Admin-level
Idle-Cut
FTP-directory
Access-Limit :No

1.9 Maintaining AAA and User Management

This section describes how to maintain AAA and user management.

1.9.1 Clearing the Statistics

1.9.2 Monitoring the Running Status of AAA

1.9.3 Debugging
1.9.1 Clearing the Statistics
Context
Statistics cannot be restored after you clear them. So, confirm the action before you use the
command.
Run the following command in the user view to clear the statistics.
Procedure
l
----End
1.9.2 Monitoring the Running Status of AAA
Procedure
Step 1 Run the display aaa configuration command to view AAA running information.
----End
1-40
: hello
: Active
: A
: -
: No
: -
CAUTION
Run the reset hwtacacs-server statistics { all | accounting | authentication |
authorization } command to clear the statistics on the HWTACACS server.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Accessed-Num :0
Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
Issue 06 (2010–01–08)