Optional) Naming An Information Channel; Optional) Configuring The Function Of Filtering Logs By Ids - Huawei Quidway S9300 Configuration Manual

2 Information Center Configuration

2.2.3 (Optional) Naming an Information Channel

Naming an information channel helps you understand what is output by each channel.
Context
Do as follows on the switch.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center channel channel-number name channel-name
A channel is named.
----End

2.2.4 (Optional) Configuring the Function of Filtering Logs by IDs

The binary log function can filter specific logs.
Context
Binary logs provide the function of filtering specified logs by their IDs. To filter certain logs,
the user can obtain IDs of these logs through log resolution tools and add these IDs to the log
filtering list.
After that, the information center does not send these logs in each output direction.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center filter-id { id } &<1-50>
One or more IDs are added and a space is used to separate these IDs.
----End
2-10
NOTE
Currently, only 50 IDs can be shielded. The aggregation of these shielded IDs is called a log ID filtering
list. The log ID filtering list is arranged by ID values.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Issue 01 (2010-12-15)