Configuring A Domain; Establishing The Configuration Task - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
Procedure
Step 1 Run the display service-scheme [ name name ] command to view the configuration of a service
scheme.
----End
Example
Run the display service-scheme command to view all the information about the service scheme.
<Quidway> display service-scheme
-------------------------------------------------------------------
service-scheme-name
-------------------------------------------------------------------
svcscheme1
svcscheme2
-------------------------------------------------------------------
Total of service scheme: 2
Run the display service-scheme name svcscheme1 command to view the configuration of
service scheme svcscheme1.
<Quidway> display service-scheme name svcscheme1
service-scheme-name
service-scheme-primary-dns
service-scheme-secondry-dns
service-scheme-uppriority
service-scheme-downpriority
service-scheme-adminlevel
service-scheme-dhcpgroup
service-scheme-flowstatup
service-scheme-flowstatdown
Idle-data-attribute(time,rate): <0,60>

1.7 Configuring a Domain

This section describes how to configure a domain on the S9300.

1.7.1 Establishing the Configuration Task

1.7.2 Creating a Domain
1.7.3 Configuring Authentication , Authorization and Accounting Schemes for a Domain
1.7.4 Configuring a RADIUS Server Template for a Domain
1.7.5 Configuring an HWTACACS Server Template for a Domain
1.7.6 (Optional) Configuring a Service Scheme for a Domain
1.7.7 (Optional) Setting the Status of a Domain
1.7.8 (Optional) Configuring the Domain Name Delimiter
1.7.9 Checking the Configuration
1.7.1 Establishing the Configuration Task
Issue 06 (2010–01–08)
: svcscheme1
: -
: -
: 0
: 0
: 16
: -
: false
: false
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA and User Management Configuration
scheme-index
0
1
1-29