Optional) Forcibly Cutting A User Off; Checking The Configuration - Huawei Quidway S9300 Configuration Manual

1 AAA and User Management Configuration
The idle-cut function is enabled for a local user.
By default, the idle-cut function is disabled for a local user.
----End

1.3.8 (Optional) Forcibly Cutting a User Off

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
cut access-user username local [ user-name ]
The user that logs in to the S9300 with a specified user name in local authentication mode is
forcibly cut off.
----End

1.3.9 Checking the Configuration

Prerequisite
The configurations of the local user are complete.
Procedure
l
----End
Example
After completing the configuration of local user management, you can run the display local-
user command to view brief information about attributes of the local user.
1-8
NOTE
By default, the idle-cut duration set in a domain does not take effect for a local user. After you enable
l
the idle-cut function for a local user, the user can obtain the idle-cut duration.
The idle-cut duration is prioritized in descending order as follows:
l
Idle-cut duration delivered by the server
l
Idle-cut duration set in the AAA domain view
l
Idle-cut duration set in the user interface view.
l
Run the display local-user [ username user-name ] command to check the attributes of
the local user.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
Issue 01 (2009-07-28)