Host Interface - Oki MICROLINE MX Series User Manual

HOST INTERFACE

HOST
INTERFACE
(from page 68)
Auto Twinax
Switching*
(Available with
(see page 84)
CT Option)
Serial E-Net
Adapter
(see page 96) (see page 104)
The Host Interface Menu enables you to select and configure one
of many types of interfaces between the printer and your host
computer. The currently selected interface is indicated with an
asterisk on the control panel message display. Each interface has
its own submenu with a set of interface parameters which can be
configured.
IMPORTANT
When switching between Twinax, Coax, or Auto Switching, the
printer will load the power-up configuration and the new
interface parameters. Any settings made and not saved before
selecting these interfaces will be lost.
Coax IEEE 1284
(Available with
(see page 86)
CT Option)
Ethernet
(see page 105)
HOST INTERFACE
Optimizing Print Speed
* = Factory Defaultt
Centronics Dataproducts
(see page 89) (see page 92)
83